Description

Matala 2 Way Heavy Duty Manifold 1/2 inch Barb

The Heavy Duty Manifolds are designed to allow high flow rates. The manifolds are available in 2 way or 4 way with 3/8", 1/2" and 5/8" barbs.

The 3/4" inlet connects to your air pump or compressor. The multiple 3/8" outlets will connect to 3/8" air hose delivering air to your diffusers. The fittings are high-quality brass. Size the manifold to your air pumps air output.

HK25L through HK80L air flow can handle 2-way or 4-way manifolds.

HK100L and HK120L should use the 4 way only so as not to restrict air flow.

NOTE !! The outlet fitting of the HK25L through HK100L is a 5/8" diameter. You can connect the 5/8" pump outlet directly to the 3/4" manifold inlet with a short piece of 5/8" or 3/4" hose ( supplied with air pump). However, the 2 way or 4 way manifold outlets are only 3/8" so you must reduce down to 3/8" hose to feed your air diffusers. The HK120L outlet fitting is 1". You will need a reducer hose from 1" to 3/4" (supplied with HK120L) in order to connect the HK120L to the manifold inlet. And then use 3/8" hose to feed your air diffusers.

The 1/4 HP Rocking Piston Compressors can use 2 way or 4 way manifold.

The 1/2 HP and 3/4HP rocking Piston Compressors should use the 4 way manifold.